Warnings |
---|
Aluminum Truck Racks – Black
Protect the rear of your pickup cab with a Dee Zee UltraBlack Cab Rack.
Truck Cab Protection, Dee Zee Tough.
Even if you secure your cargo properly, it can still happen. Driving on today’s hectic roads can lead to extreme stopping situations that could end up sending cargo barreling through your truck cab’s rear window. With the Dee Zee Cab Rack this is no longer a concern.
Made of 100% 2.75” aluminum tubing with a protective gloss or textured black powder coating, our cab racks are built to handle as much abuse as you can throw at them. A rear window protection screen consists of either heavy duty ultra mesh – for your protection and visibility requirements.
Want to Accessorize? No Problem.
We know truck needs vary from one job to another, that’s why we’ve designed our Cab Rack with an integrated channel system, for endless accessory possibilities. We’ve also made it simple to install by bolting directly into your vehicles existing stake pocket holes.
Dee Zee Cab Racks Feature:
- Rugged Protection for your trucks rear cab area
- 2.75" Octagonal Aluminum Tubing for rugged construction
- Heavy-Duty Aluminum Ultra Mesh offers more visibility and protection depending on your needs
- Protective Textured or Gloss Black Powder Coat Finish keeps your rack looking fresh
- Integrated Channel System for easy addition of accessories
- Includes Set Of 2 Removable Tie Down Mounts
- Installs Into Existing Stake Pocket Holes
- Limited-Lifetime Warranty
Dee Zee products are eligible for return within 30-days from receipt. Items must be returned in new condition with all original packaging, literature, hardware, and parts. Customers are responsible for related shipping costs and subject to a restocking fee. Click to review our full returns policy.
Dee Zee, Inc. guarantees the original purchaser a limited lifetime warranty against manufacturer defects in materials, workmanship, and design under normal use, excluding damage resulting from road hazards such as gravel or other debris, product misuse, improper installation, impairments from accidents, product modifications, improper repairs, spills, vandalism, product neglect, or acts of God.
This warranty applies only to the original purchaser of new product(s) and is limited to the replacement of genuine Dee Zee products. Modification of any kind to Dee Zee products voids all warranty coverage. Warranty does not include electrical components, installation, cost of removal, labor, transportation costs, loss of use, inconvenience, or consequential damages.
WARRANTY COVERAGE - MATERIALS & WORKMANSHIPLIMITED LIFETIME WARRANTY:
- STAINLESS STEEL: Side Steps, Grill Guards, Bull Bars, Bed Caps, and Side Rails
- ALUMINUM: Side Steps, Running Boards, Storage Boxes, Transfer Tanks, Bed Protection, Invis-A-Racks, Cab Racks, and Side Rails
- PLASTIC: Storage Boxes
- OTHER: Front and Rear Bumpers
- POWDER-COATED / E-COATED STEEL: Side Steps, Running Boards, Storage Boxes, Transfer Tanks, Cab Racks, Ladder Racks, Sport Bar, Cargo Carriers, Mounting Brackets (NX, Rough Step, and Bumper Guards only)
- OTHER: Tailgate Assist, Bed Mats, Floor Mats, Auxiliary Fuel Connection Kits, and All Products Not Otherwise Listed Individually
WARRANTY COVERAGE – COMPONENT PARTS
Operational items such as shocks, latches, hinges, and wear items including, but not limited to, mud flaps, step pads, end caps, hardware, seals, etc. have a one-year (1) warranty. Replacement component parts can be ordered via credit card (MasterCard or VISA) by calling 1-800-779-2102. All replacement parts are non-returnable and non-refundable.
WARRANTY COVERAGE – FINISH PROTECTIONThe finish of all Dee Zee products is covered for one-year (1) from the date of purchase. Dee Zee products have a high quality finish that must be cared for and maintained like any other exposed finish on the vehicle. Protect the finish with non-abrasive automotive wax (e.g. Pure Carnauba) on a regular basis. Applying soaps, polishes, or waxes that contain an abrasive compound may scratch the finish and leave the exposed material susceptible to corrosion.
WARRANTY COVERAGE – COMPONENT PARTSOperational items such as shocks, latches, hinges, and wear items including, but not limited to, mud flaps, step pads, end caps, hardware, tool box trays, seals, etc. have a one-year (1) warranty. Replacement component parts can be ordered via credit card (MasterCard or VISA) by calling 1-800-779-2102. All replacement parts are non-returnable and non-refundable.
GPI TRANSFER TANK PUMPS & ACCESSORIESAll Great Plains Industries (GPI) products, including transfer tank pumps and fuel meters are covered by GPI’s warranty policies. Dee Zee’s warranty terms do not apply to GPI products. To submit a warranty claim, please contact GPI at 1-800-835-0113 or visit www.gpi.net.
WARRANTY SUBMISSION PROCEDUREAll warranty claims will be initiated at the place of purchase. The original purchaser will be required to present the original sales receipt with purchase date shown and provide photographs of the defect.
In the event the originally purchased product style is no longer available, Dee Zee will warranty the defective part with a current equivalent. If a comparable product is no longer available, the product would be returned to the store of purchase for a refund or the applicable cost difference can be paid to choose an alternate style.
DISCLAIMERAll products are sold as appearance accessories and should not be relied upon as protection for the vehicle or its occupants in the event of an accident. Vehicles equipped with a supplemental restraints system (air bags) deployed by impact and collision avoidance systems should not be modified in any way. Always consult the vehicle manufacturer if you have any questions regarding supplemental restraint systems and sensors.
Buyer must accommodate front and rear sensors during product installation and assumes all risk should these be tampered, rerouted, severed, or disconnected. This includes disabling visual, audio, or vibration alerts into the cab. Buyer assumes all risk and responsibility for wiring any supplemental auxiliary lights.
Buyer assumes all risk, liability, and cost for the installation and use of Dee Zee products. Dee Zee, Inc. assumes no liability for injury, loss, incidental or consequential damages in the event of an accident.
AdminDeeZee2 –
We have been told by our R&D that the non mesh will not mount to the front behind the cab. The mesh versions are the only ones that will mount in this location.
AdminDeeZee2 –
There are a lot of things that can create fitment issues with the cab racks. Even some of our wider toolboxes go a little beyond the side pieces of the cab rack.
AdminDeeZee2 –
Some of our racks have different dimensions. I would depend on the vehicle it is being mounted on.
AdminDeeZee2 –
There is an image of one installed when you look at part number DZ95050R. Yes a standard toolbox will fit with the rack.
AdminDeeZee2 –
I am not sure what you mean by a matching lower rack.
AdminDeeZee2 –
We don’t have any specific drawings for this type of information. The cab rack sits on top of the front bed rail and can be adjusted forward a little. The main concern would be the plates used to mount the rack to the bed and if it will work. Please review the installation instructions.
AdminDeeZee2 –
Call customer service. They will be able to assist you with that. 800-779-2102
AdminDeeZee2 –
The distance between the vertical pieces of our cab rack is 70 3/4″.
AdminDeeZee2 –
Filling in all the vehicle information the part number should be DZ95050RB.
AdminDeeZee2 –
When using a single unit the capacity is 300 lbs.
AdminDeeZee2 –
The dimensions are 72.853″. The width of 73 is the width of the packaging. This length is the same on all three finishes. Sorry for the confusion.
AdminDeeZee2 –
It would mount fine but the plates used to mount the rack to the bed may interfere with the rambox opening.
AdminDeeZee2 –
We have racks with mesh and without. That is for people that want one at the rear and the mesh is not necessary at the rear.
AdminDeeZee2 –
The distance between the angles is 70.75″ and the length of the plate is 23.819″.
AdminDeeZee2 –
The gull wing box with latches on the end may cause some issues with function. There is space for it to fit but getting a hand in there to open and not get your hand stuck will be an issue.
AdminDeeZee2 –
I am not sure what you are asking. Truck Racks are sold separately.
AdminDeeZee2 –
Yes. Our toolboxes will fit between the cab rack plates.
AdminDeeZee2 –
No. The flareside beds are narrower.
AdminDeeZee2 –
IF the tonneau cover uses the inside rail they will not work together. The rack uses the inside rail for installation.
AdminDeeZee2 –
Part number would be DZ95054RTB.
AdminDeeZee2 –
Unfortunately there are so many different tonneau covers and installations that we are unable to test fit them all. Any cover that attaches to the inside rail and uses the front cap will be affected by the cab rack.
James –
I have a 2017 f350 and looking at getting the black aluminum headache rack but just wondering what tonneau will work with this unit or if any will work at all. I sure hope the is one that will work. These rack look sweet
AdminDeeZee2 –
The rack is all one piece with the mesh welded in. The feet come unattached. You will need to check to see if the tonneau cover will work. The racks feet do come down on the inside of the bed rail for installation.
AdminDeeZee2 –
We are currently out of stock. Expecting to get more around 6/21.
AdminDeeZee2 –
We used a Rigid 20″ light bar for testing purposes. Lights are mostly universal so most 20″ light bars should work.
AdminDeeZee2 –
Not that familiar with the Weather guard saddle boxes and how they mount. I suggest checking the mounting before purchase.
Britt –
The fit and finish is awesome and I love how you can mount aux lights to the bars in the square channel. I docked one point because you cannot use a tonneau cover with the rack. The mesh headache rack looks pretty sweet!
AdminDeeZee2 –
With all the different models and types of tonneau covers on the market we are unable to test fit them all with the cab rack. I recommend looking at the installation of the rack to see if it will allow the tonneau to be mounted properly at the front of the bed.
AdminDeeZee2 –
We do not have a cab rack for the Rambox. The plates that mount the rack to the truck interfere with the storage areas.
AdminDeeZee2 –
Part number is DZ95050B for gloss black and DZ95050TB for textured black. Dimensions are 72.853″ across and 23.158″ for height.
AdminDeeZee2 –
Yes. Those two vehicles use the same application for cab racks.
AdminDeeZee2 –
Cab racks for Dodge only go back to 2009. We currently don’t have any that will fit properly before that model year.
AdminDeeZee2 –
DZ95050WB is gloss black and DZ95050WTB is textured black.
AdminDeeZee2 –
We do not have one that fits that far back on a Dodge.
AdminDeeZee2 –
The part number would DZ95073B. It has not been released yet. Will not be available until June 2017.
AdminDeeZee2 –
73 is the overall dimensions.
AdminDeeZee2 –
Yes. However it may not install the same at the rear because of the way GM made the stake pockets. You will have to install it by drilling on the inside rail.
AdminDeeZee2 –
Unfortunately the fitment for Dodge 2500 only go back to 2010.
AdminDeeZee2 –
That is a starting price for the cab racks. The racks without the mesh are $366.95. The DZ95050B that has the mesh is $551.95. If you put your vehicle application the options will show you the different prices.
AdminDeeZee2 –
The rack will probably affect the view the camera has.
AdminDeeZee2 –
The distance is 70 3/4″ and the rack may be able to slide a little closer to the cab. But will not leave much of the front cap usable.
AdminDeeZee2 –
DZ95050 will fit on a 97 GMC.
AdminDeeZee2 –
Attaches to the stake pocket and inside of the bed rail.
AdminDeeZee2 –
That can vary from truck to truck. So we don’t have that dimension.
AdminDeeZee2 –
At this time we only have the rack for the front of the Tundra. Unfortunately we are unable to custom build products. Custom products do not flow in our current manufacturing processes.
AdminDeeZee2 –
Our cab rack uses the inner bed rail for installation purposes. This could affect how the tonneau cover installs and fits. I recommend looking at the instructions for clarification.
AdminDeeZee2 –
Cab racks are single units. Front and rear are separate part numbers.
AdminDeeZee2 –
No. Currently we don’t have one that will fit properly on the Raptor. Those trucks have wider beds than the standard F150’s.
AdminDeeZee2 –
Not sure if the Bak cover will work or not. Our cab rack has a flange that is used for mounting purposes on the inside rail of the truck bed.
AdminDeeZee2 –
Capacity is 300 lbs. for one and 500 lbs. for two.
AdminDeeZee2 –
It is dependent on how the cover mounts at the front of the bed. There is a plate that sits on the bed rail and extends down on the inside of the pickup bed rail for mounting purposes.
AdminDeeZee2 –
Yes. That would the cab rack with no mesh.
AdminDeeZee2 –
Blue series crossover toolbox.
AdminDeeZee2 –
Cab racks are sold individually. The price is for one rack mesh, no mesh, front, or rear.
AdminDeeZee2 –
It will interfere with opening the ram box. There is a plate that sits on the bed rail for installation.
AdminDeeZee2 –
We do not at this time.
AdminDeeZee2 –
Here is the link to the location on our website for the light mounts. https://www.deezee.com/product/headache-rack-light-mounts/.
AdminDeeZee2 –
The new 2017 SuperDuty has a new part number. With mesh is DZ95072 silver, DZ95072B gloss black, and DZ95072TB textured black.
AdminDeeZee2 –
You can contact customer service to get those parts. 800-779-2102.
AdminDeeZee2 –
Dee Zee does not make the cab rack with an opening for the sliding window.
AdminDeeZee2 –
Cab racks with or without mesh can be mounted at the front of the pickup bed behind the window.
AdminDeeZee2 –
We no longer make the louvered style cab rack. We ran into some issues with that style of rack.
AdminDeeZee2 –
We do not have racks with lights. Our racks come with the ability to have lights attached. You will need to investigate how the tonneau cover mounts to see if it will work in conjunction with the truck rack.
AdminDeeZee2 –
Give a call to customer service, they will have that information. 800-779-2102.
AdminDeeZee –
The DZ95054TB can be installed on either the front or the rear. This will have no mesh in the center. We also have the DZ95050TB that can be installed at either location that will have the mesh in the middle. Many times the mesh will be used behind the cab and open frame used on the rear to create a ladder rack.