Warnings |
---|
Aluminum Truck Racks
Dee Zee 100% aluminum Ultra Mesh Cab Racks help protect the rear of the pickup's cab area.
Truck Cab Protection, Dee Zee Tough.
Even if you secure your cargo properly, it can still happen. Driving on today’s hectic roads can lead to extreme stopping situations that could end up sending cargo barreling through your truck cab’s rear window. With the Dee Zee Cab Rack this is no longer a concern.
Made of 100% 2.75” aluminum tubing with a protective silver powder coating, our cab racks are built to handle as much abuse as you can throw at them. A rear window protection screen consists of heavy duty ultra mesh – for protection and visibility requirements.
Want to Accessorize? No Problem.
We know truck needs vary from one job to another, that’s why we’ve designed our Cab Rack with an integrated channel system, for endless accessory possibilities. We’ve also made it simple to install by bolting directly into your vehicles existing stake pocket holes.
Dee Zee Cab Racks Feature:
- Rugged Protection for your trucks rear cab area
- 2.75" Octagonal Aluminum Tubing for rugged construction
- Heavy-Duty Aluminum Ultra Mesh offers more visibility and protection depending on your needs
- Protective Silver Powder Coat Finish keeps your rack looking fresh
- Integrated Channel System for easy addition of accessories
- Includes Set Of 2 Removable Tie Down Mounts
- Installs Into Existing Stake Pocket Holes
- Limited-Lifetime Warranty
Dee Zee products are eligible for return within 30-days from receipt. Items must be returned in new condition with all original packaging, literature, hardware, and parts. Customers are responsible for related shipping costs and subject to a restocking fee. Click to review our full returns policy.
Dee Zee, Inc. guarantees the original purchaser a limited lifetime warranty against manufacturer defects in materials, workmanship, and design under normal use, excluding damage resulting from road hazards such as gravel or other debris, product misuse, improper installation, impairments from accidents, product modifications, improper repairs, spills, vandalism, product neglect, or acts of God.
This warranty applies only to the original purchaser of new product(s) and is limited to the replacement of genuine Dee Zee products. Modification of any kind to Dee Zee products voids all warranty coverage. Warranty does not include electrical components, installation, cost of removal, labor, transportation costs, loss of use, inconvenience, or consequential damages.
WARRANTY COVERAGE - MATERIALS & WORKMANSHIPLIMITED LIFETIME WARRANTY:
- STAINLESS STEEL: Side Steps, Grill Guards, Bull Bars, Bed Caps, and Side Rails
- ALUMINUM: Side Steps, Running Boards, Storage Boxes, Transfer Tanks, Bed Protection, Invis-A-Racks, Cab Racks, and Side Rails
- PLASTIC: Storage Boxes
- OTHER: Front and Rear Bumpers
- POWDER-COATED / E-COATED STEEL: Side Steps, Running Boards, Storage Boxes, Transfer Tanks, Cab Racks, Ladder Racks, Sport Bar, Cargo Carriers, Mounting Brackets (NX, Rough Step, and Bumper Guards only)
- OTHER: Tailgate Assist, Bed Mats, Floor Mats, Auxiliary Fuel Connection Kits, and All Products Not Otherwise Listed Individually
WARRANTY COVERAGE – COMPONENT PARTS
Operational items such as shocks, latches, hinges, and wear items including, but not limited to, mud flaps, step pads, end caps, hardware, seals, etc. have a one-year (1) warranty. Replacement component parts can be ordered via credit card (MasterCard or VISA) by calling 1-800-779-2102. All replacement parts are non-returnable and non-refundable.
WARRANTY COVERAGE – FINISH PROTECTIONThe finish of all Dee Zee products is covered for one-year (1) from the date of purchase. Dee Zee products have a high quality finish that must be cared for and maintained like any other exposed finish on the vehicle. Protect the finish with non-abrasive automotive wax (e.g. Pure Carnauba) on a regular basis. Applying soaps, polishes, or waxes that contain an abrasive compound may scratch the finish and leave the exposed material susceptible to corrosion.
WARRANTY COVERAGE – COMPONENT PARTSOperational items such as shocks, latches, hinges, and wear items including, but not limited to, mud flaps, step pads, end caps, hardware, tool box trays, seals, etc. have a one-year (1) warranty. Replacement component parts can be ordered via credit card (MasterCard or VISA) by calling 1-800-779-2102. All replacement parts are non-returnable and non-refundable.
GPI TRANSFER TANK PUMPS & ACCESSORIESAll Great Plains Industries (GPI) products, including transfer tank pumps and fuel meters are covered by GPI’s warranty policies. Dee Zee’s warranty terms do not apply to GPI products. To submit a warranty claim, please contact GPI at 1-800-835-0113 or visit www.gpi.net.
WARRANTY SUBMISSION PROCEDUREAll warranty claims will be initiated at the place of purchase. The original purchaser will be required to present the original sales receipt with purchase date shown and provide photographs of the defect.
In the event the originally purchased product style is no longer available, Dee Zee will warranty the defective part with a current equivalent. If a comparable product is no longer available, the product would be returned to the store of purchase for a refund or the applicable cost difference can be paid to choose an alternate style.
DISCLAIMERAll products are sold as appearance accessories and should not be relied upon as protection for the vehicle or its occupants in the event of an accident. Vehicles equipped with a supplemental restraints system (air bags) deployed by impact and collision avoidance systems should not be modified in any way. Always consult the vehicle manufacturer if you have any questions regarding supplemental restraint systems and sensors.
Buyer must accommodate front and rear sensors during product installation and assumes all risk should these be tampered, rerouted, severed, or disconnected. This includes disabling visual, audio, or vibration alerts into the cab. Buyer assumes all risk and responsibility for wiring any supplemental auxiliary lights.
Buyer assumes all risk, liability, and cost for the installation and use of Dee Zee products. Dee Zee, Inc. assumes no liability for injury, loss, incidental or consequential damages in the event of an accident.
AdminDeeZee2 –
Height of the rack is 21.158″.
AdminDeeZee2 –
Yes. The rear rack is made out of the same material as the fronts.
AdminDeeZee2 –
Yes. Our toolboxes fit between the vertical edges of the mounting plates.
AdminDeeZee2 –
Between the vertical part of the plates is 70.75″ across. Any of our standard crossover toolboxes will fit. They measure 69.75″.
AdminDeeZee2 –
Overall width is 72.583″. This is outside to outside of where it mounts.
AdminDeeZee2 –
At this time we only have the light mounts in powder coated steel.
AdminDeeZee2 –
We do not have bed rails that will connect to the cab rack and run along the bed rail.
AdminDeeZee2 –
We do not have bed rails that will connect to the cab rack and run along the bed rail.
AdminDeeZee2 –
Our suggestion would be to look at the Invis-A-Rack. When not in use it collapses down and out of the way.
AdminDeeZee2 –
I am not sure which truck this is going on. For 1500 series DZ95050R would be correct. For 13-17 2500/3500 trucks would be DZ95058R. If you still are having an issue contact customer service. 800-779-2102.
AdminDeeZee2 –
Unfortunately we don’t have any different side pieces for the cab racks to work better with gullwing style toolboxes.
AdminDeeZee2 –
Sorry part number is DZ95050R.
AdminDeeZee2 –
DZ95050 should fit your truck. We have the application listed 73-17.
AdminDeeZee2 –
They are available to ship now. The mesh is DZ95072(B)(TB) depending on the color you want.
AdminDeeZee2 –
At this time we don’t have the non mesh available for the 17 2500/3500 Ram. The mesh part number would be DZ95058R.
AdminDeeZee2 –
I suggest you get one for the front and one for the rear to haul a kayak.
AdminDeeZee2 –
The standard non mesh rack is DZ95054R, If you have a Ford SuperDuty or Dodge the part number is different. The DZ95002 is the tie downs that are available.
AdminDeeZee2 –
It will close. The vertical pieces angle inward. It is approximately 70.75″ between them.
AdminDeeZee2 –
Any of our standard toolboxes that measure 69.75″ will fit between the vertical pieces of the cab rack.
AdminDeeZee2 –
The application part number is DZ95050R.
AdminDeeZee2 –
No it will not. The SuperDuty is wider. The proper part number would be DZ95050WR.
AdminDeeZee2 –
Cab racks fit all standard Dodge truck beds.
AdminDeeZee2 –
No. Our cab racks are only for the styleside truck beds.
AdminDeeZee2 –
Currently the smallest is for a fullsize truck. Width of the rack is 72.853″ and the mounting plates are 5″ wide.
AdminDeeZee2 –
If you get the front and rear racks, they can be used in conjunction as a ladder rack.
AdminDeeZee2 –
DZ95054 can be installed either at the front, rear, or both.
AdminDeeZee2 –
DZ95050 and DZ95054 are essentially the same item. One has mesh and the other doesn’t. The measurement of the between the mounting plates on both racks is 61.873″.
AdminDeeZee2 –
The 95058 is 2 inches taller to accommodate the height of the cab for the Dodge. The 95050 would not allow for clearance if anything was put on top.
AdminDeeZee2 –
We don’t have one with mesh that would work with a sliding rear window. Other option would be the non-mesh.
AdminDeeZee2 –
We use a DuPont powder on the cab racks. I am unaware of a specific code since it is a powder.
AdminDeeZee2 –
If you go the product page the instructions would be there. You can view them online. https://www.deezee.com/product/dz95058-aluminum-truck-racks/.
AdminDeeZee2 –
Cab racks install the same whether it is at the front or the rear and mesh or no mesh.
AdminDeeZee2 –
The tubing of the cab rack does not go into the stake pockets. They are welded to the mounting plate.
AdminDeeZee2 –
Currently don’t have the non mesh option for the SuperDuty.
AdminDeeZee2 –
DZ95054 would be no mesh.
AdminDeeZee2 –
It will be close. Our standard crossover toolboxes fit at a measurement of 69.75″. Looking at the drawings it will be approximately 72.75″.
AdminDeeZee2 –
The height of our DZ95050 is 23.158″.
AdminDeeZee2 –
DZ95073 is silver no mesh.
AdminDeeZee2 –
Yes. A standard crossover toolbox will fit.
AdminDeeZee2 –
I am assuming you meant a GMC 3500hd. Yes it will fit.
AdminDeeZee2 –
The no mesh part number is DZ95054.
AdminDeeZee2 –
The part number for no mesh is DZ95054.
AdminDeeZee2 –
We have our mesh in silver or gloss black available now. Textured black coming soon. Part numbers are DZ95072 and DZ95072B.
AdminDeeZee2 –
2017 Ford SD cab racks are coming. We only make them with or with out mesh.
AdminDeeZee2 –
The holes were not designed specifically for any use. There have been customers that used them for securing things that they were hauling.
AdminDeeZee2 –
It all depends on what the setup is for the front part of the cover. The rack has a flange that goes down on the inside of the bed rail, which can interfere with the tonneau covers unit that mounts to the front.
AdminJeff De Vries –
It is an M8-1.25X20 square head. That is the information I have.
AdminDeeZee –
The cab rack for a 2017 Super Duty should be available in Q1 but we are currently still developing this product. The part numbers will be DZ95072(B/TB) and DZ95073(B/TB).