Dee Zee Poly Crossover Toolbox
Made of a resilient poly material, the Dee Zee Poly Crossover Tool Box combines the functionality of a crossover tool box with the benefits of hardened poly plastic. This tough box can handle all the abuse you can throw at it, without sagging or denting. The center cross support ties the rear and the front together for additional support. The box has a double-wall lid for rigidity and features a molded brite-tread pattern and textured plastic. The overlapping flap on the lid deflects water from entering the box, where the next line of defense awaits with a foam gasket. You can trust your tools, camping gear or even your golf clubs will benefit from these features.
Designed to Weather the Storm
Don’t think you are sacrificing security with a lightweight rigid frame. Metal striker plates are integrated into the lid to engage a full-length locking rod. This single moving part sucks down the entire rigid lid for secure closure every time. The rotary keyed lock stops the bar from moving when locked. Both the keyhole and sliding rod operate from the driver’s side.
Good Look and Function
The narrow design avoids interference with truck bed wheel wells and this box can be shipped via ground transportation without any large package surcharges! Going hunting or camping this weekend and need something overnighted to your doorstep? Boom! Available in two lengths to fit midsize trucks (63”) and full-size trucks (70”), this box has a discrete look with its low-profile lid that only sits inches above the bed rail and matches spray in bed liners.
Poly Crossover Toolbox Features:
- Rigid Poly Plastic Frame Resists Warping- No Sagging or Denting
- Overlapping Lid and Foam Gasket Helps Make Box Weather Resistant
- Double-Wall Lid Features Molded Brite-Tread Pattern
- Metal Striker Plate in Lid Features Full-Length Locking Rod For Tight Close
- Ships To Your Doorstep Without Large Package Surcharges
- Available in Two Sizes – for Midsize and Full-Size Trucks
- Made In USA
- Limited-Lifetime Warranty
AdminDeeZee2 –
It is not necessary but that is an option.
AdminDeeZee2 –
The poly crossover comes with the J-bolt for mounting.
AdminDeeZee2 –
Get in contact with our customer service for assistance on getting the necessary parts. 800-779-2102
AdminDeeZee2 –
Yes. DZ6163P would be the toolbox.
AdminDeeZee2 –
Contact customer service and they will be able to order the replacement. 800-779-2102
AdminDeeZee2 –
Approximately 62 1/2″. This can vary since it is made in a blow mold process and can change a little bit as it cools from manufacturing.
AdminDeeZee2 –
It does come with a mounting kit.
AdminDeeZee2 –
It is water resistant. It is not water tight.
AdminDeeZee2 –
Yes the mounting hardware is included.
AdminDeeZee2 –
You can find the external dimensions under the “Additional Information” tab under the product for both DZ6170P and DZ6163P. Here is the large one https://www.deezee.com/product/dz6170p-poly-crossover-tool-box/. We don’t have any of the internal dimensions because of the way the support ribs are formed into the box. The only difference is the thickness of material.
AdminDeeZee2 –
It is close but it will fit. The length between the mounting plates vertical piece is 72.5″.
AdminDeeZee2 –
No it will not. The poly crossover is a narrower box. The plastic tray fits our standard width toolboxes.
AdminDeeZee2 –
L 39″ x W 27″ x H 17″.
AdminDeeZee2 –
There is no W1 dimension to this box. It lower body tapers slightly but not like a traditional toolbox.
AdminDeeZee2 –
Our version for a midsize truck has a length of 63″ and the lower in bed section is 54″
AdminDeeZee2 –
There is no foam for the bed sides just J bolts. We do supply a foam piece for the aluminum angle piece for rubbing purposes and is there for added support.