Versatile storage for All Sorts of Uses
You can never have enough rugged storage. Whether you’re storing tools, hauling game day gear, or coming up with literally hundreds of other uses- Dee Zee’s universal poly plastic chest is like the Swiss Army Knife of utility chests.
Constructed of strong yet lightweight plastic with a double wall lid, our universal utility chest can handle all the abuse you can throw at it.
Quick, Convenient Storage When You Need It.
We’ve designed our utility chest to add quick, convenient storage for all sorts of applications. Available in two sizes to suit your needs. We even included molded drink holders in case you decide to use it on the go and get a little thirsty. Don’t worry if the weather doesn’t cooperate, a foam gasket around the lid helps defend your items against the elements.
Have something important you need to keep secure? Built in locations on lid accept your pad lock for security and peace of mind (pad locks not included).
Dee Zee Universal Poly Utility Chest Features:
- Convenient Molded Cup Holders
- Foam gasket around lid helps makes box weather resistant.
- Built in locations on lid accept your pad lock for security (pad locks not included).
- Poly Plastic Storage Chest Rigid Plastic Frame Resists Warping
- Double Wall Lid For Extra SupportClassic Brite-Tread Pattern
- Two Sizes to Choose From
- Made In USA
- Limited-Lifetime Warranty
AdminDeeZee2 –
There is no clear inner dimensions. The box is not flat on the sides. On the ends the box is indented with handles and the front and back have ribs for strength.
AdminDeeZee2 –
Yes. There is a location for a padlock.
AdminDeeZee2 –
We have run into an error on our site and the information is not working at the moment. The two part numbers are DZ6535P and DZ6537P. The sizes are quite different. small is 35″x14″x13″ and the large is 37″x27″x17″.
AdminDeeZee2 –
There is no true measurement for the inside of our poly boxes. The design of the box has rigidity set into the mold which affects all inside dimensions.
AdminDeeZee2 –
Depending where the box will be mounted, attaching it with bolt, washer, and nut would be best. That would make it more difficult for someone to get the box removed.
AdminDeeZee2 –
The box is not water tight. There could be a concern about some water getting in there and causing issues with the batteries. The small poly would be fine to mount to a trailer for storage.
AdminDeeZee2 –
Our boxes are weatherproof.
AdminDeeZee2 –
It weighs 29 lbs.
AdminDeeZee2 –
The measurements are for the overall outside of the box.
AdminDeeZee2 –
Not sure which poly chest this question is referring to.
AdminDeeZee2 –
I don’t know which poly chest you are referring to.
AdminDeeZee2 –
There is not a drain hole in the poly chests.
AdminDeeZee2 –
The small DZ6537P would fit. We always suggest to check the dimensions of the box with where it will be located in the vehicle to make sure it will work.
AdminDeeZee2 –
Approximately 33 x 13 x 11.
AdminDeeZee2 –
You will have to find the location where the rod is installed into.
AdminDeeZee2 –
You can use one or two small padlocks to lock the Poly chest.
AdminDeeZee2 –
The largest poly box we have is the DZ6537P. Dimensions are 39″ x 27″ x 17″.
AdminDeeZee2 –
They can be but do not connect in any way.
AdminDave W. –
It’s sturdy and the molded ends make it easy to carry.
AdminDeeZee2 –
You will need to check the dimensions of the DZ6535P and DZ6537P to see which will fit. Pretty sure the DZ6535P will fit it is the smaller of the two.
AdminDeeZee2 –
It is universal in where it can be used. You will have to devise a way to install it.
AdminDeeZee2 –
No. There is nothing that would interlock them together.
AdminDeeZee2 –
The hinge rod is zinc plated steel.
AdminDeeZee2 –
There is not an install kit with the small poly. There are so many ways this box can be used and we can not supply a install kit for all the different ways.
AdminDeeZee2 –
On the overall dimensions the opening is 2″ narrower. Example the large is 39″ x 27″. Opening would be 37″ x 25″. This can vary by approximately 1/16″.
AdminDeeZee2 –
Our DZ6535P is 14″ wide at the base.
AdminDeeZee2 –
The bottom strength ribs would take approximately 1/2″ from the height. It would be strong enough to mounted to rails or tray.
AdminDeeZee2 –
The bottom of the box is not flat and the handles are formed into the ends which takes up some of the interior area.
AdminDeeZee2 –
The 10.4 takes in account the ribs for support. The box is not smooth inside.
AdminDeeZee2 –
No. It is not designed for that purpose.
AdminDeeZee2 –
No. The support ribs in the bottom of the poly box takes approximately .5 to .75 of an inch of the inside height.
AdminDeeZee2 –
There support ribs are on the bottom which will take 3/4″ off the inside height. The lid is not open on the inside for strength and rigidity purposes.
AdminDeeZee2 –
Dee Zee was looking for an economical poly storage box and therefore we went with a box that doesn’t use a typical latching system. We did incorporate the ability to use padlocks to secure the the lid to the body.
AdminDeeZee2 –
There is not a good way to get this dimension. It can vary with the material and the ribs for strength. There are built in areas on the ends for lifting the boxes. At best you take approximately an 1″ off the overall length to be close.
AdminDeeZee2 –
There is not a hinge like the aluminum boxes. It is a single rod that goes through hole that is integrated through the lid and body of the box.
AdminDeeZee2 –
The height of the inside is a little hard to define. There are ribs on the floor for rigidity that will affect this measurement. Taking in these things the interior dimension is 1″ off the total height of the box you are looking at.
AdminDeeZee2 –
Please get in contact with customer service. They will work with you on getting this resolved. 800-779-2102.