Affordable, Effective Truck Bed Protection
If you’ve ever scratched your truck bed then you know the feeling that follows when you hear the sound of your investment losing value. You toss a lot of things in the bed of your truck, why not let one of them be a little protection. Dee Zee Bed Mats are a cost-effective solution for keeping your truck bed surface free from scratches, dings, and dents caused by loading and unloading, or cargo shifting around during transport.
Dee Zee Bed Mats custom fit your truck’s contours for ultimate coverage. Concerns about trapped water and rust are non-existent since our truck mats use rubber cleats on the underside to facilitate drainage and keep the Bed Mat securely in place.
Durable, lasting protection
Made with superior manufacturing, each heavy-duty Dee Zee Bed Mat is constructed from .375" (9.52mm) high-density Fiber Infused Rubber compound that resists abrasion and tears from your cargo.
The tightly compressed Rubber fibers can handle common gas or oil spills, making them perfect for transporting motorized work equipment or all-terrain vehicles. Your custom fit Bed Mat deflects harmful UV rays and will not crack, rust or break- even in the most extreme temperatures.
You can trust heavy-duty Dee Zee Bed Mats to last the life of your truck.
Dee Zee Heavyweight Bed Mats feature:
- Helps Prevent Cargo From Shifting & Damaging Your Truck Bed
- Extra Thick .375" (9.52mm) Fiber Infused Rubber Compound Construction
- Rubber Cleats Help Keep Mat In Place & Allow Water to Drain
- Highly Compressed Rubber Resists Abrasions & Tears
- Will Not Rust, Crack, Or Break – Even In Extreme Temperatures
- Resists Common Fuel & Oil Spills
- Rubber Material Deflects UV Rays To Reduce Fading
- Custom Fit Applications Contour Around Wheel Wells For A Perfect Fit
- Trimming May Be Required For Short Bed Applications
- Tailgate Mat Sold Separately
- Three-Year Warranty
garybecks51 (verified owner) –
Fit perfect, and works well.
AdminDeeZee2 –
That can vary from truck to truck. Each trucks bed length is a little longer or shorter to the next one.
AdminDeeZee2 –
Yes the bed mat will fit with the spray on liner.
AdminDeeZee2 –
DZ87005 will fit a 2019 F150 5.5′ bed.
Jeff –
Writing my first review ever at 66 years old. Just got a 2021 Tundra, ordered your bed mat and love it. Perfect fit, high quality. Bought my first DeeZee bed mat over 10 years ago for full size Chevy, then cut it down to fit my 2011 Tacoma, and just cut it down again for a nice floor mat in front of my workbench.
AdminDeeZee2 –
Yes.
AdminDeeZee2 –
3/8″ thick.
AdminDeeZee2 –
DZ86501 fits 89-04 Tacoma 6′ bed. Can be trimmed to shorter if needed.
AdminDeeZee2 –
Yes. DZ87021.
AdminDeeZee2 –
This depends on bed length. DZ87015 5.5′ and DZ87016 6′.
AdminDeeZee2 –
3/8″ thick.
AdminDeeZee2 –
Yes DZ87021 is for an 8′ bed GMC HD 2020.
AdminDeeZee2 –
Sorry for the confusion. This is an error if you are looking for the 5′ bed mat. You would only need the DZ86963. We just introduced this mat earlier this year and our data is crossed at this time. Thank you for the message and we will work to correct it.
AdminDeeZee2 –
Our bed mat is designed to fit the standard bed shape around the wheel wells. If the bed is anything different you will either have to trim the mat or go with a utility mat.
AdminDeeZee2 –
It does but will have to be trimmed.
AdminDeeZee2 –
Yes the DZ87011 will fit the 2020 F250 short bed.
AdminDeeZee2 –
The rubber bed mats are 3/8″ thick.
AdminDeeZee2 –
Currently do not have a custom fit for the Ridgeline.
rgaxel (verified owner) –
Excellent product and it arrived in 2 days.
AdminDeeZee2 –
The mats are 3/8″ thick.
AdminDeeZee2 –
We have DZ87022 for 6.5′ bed and DZ87023 for 8″ bed.
AdminDeeZee2 –
It is a custom fit bed mat.
AdminDeeZee2 –
The spray in liner will not affect the fitment of the bed mat.
AdminDeeZee2 –
Yes. It will follow the contours of the plastic liner.
AdminDeeZee2 –
That is the correct part number for a 1500 RAM 2020.
AdminDeeZee2 –
If you have ordered some direct from our website, you should receive the tracking information in an email. If you have not, contact customer service for the information. 800-779-2102
AdminDeeZee2 –
It may not lay flat because it will follow the contour of the liner.
AdminDeeZee2 –
The 6′ bed application can be trimmed for the 5′ bed.
AdminDeeZee2 –
We do offer a mat for both bed lengths.
AdminDeeZee2 –
They do but will follow the shape of the bedliner.
AdminDeeZee2 –
The mats are 3/8″ thick.
AdminDeeZee2 –
The bed mat fits but will follow the shape of the drop in liner.
AdminDeeZee2 –
Part number for 2019 F150 5.5′ bed is DZ87005.
AdminDeeZee2 –
It will but will not lay flat. It will curl up the sides with the plastic liner.
AdminDeeZee2 –
It will. But will not lay completely flat. It will follow the plastic liner and curve up on the sides.
AdminDeeZee2 –
DZ87015 will be the application for 5.7′ RAM 1500.
AdminDeeZee2 –
Yes. There is a cut line on the mat for it to be cut down for the 5′ bed.
AdminDeeZee2 –
It will have to be exchanged or returned to the place of purchase.
AdminDeeZee2 –
You can contact our customer service to verify the fitment. 800-779-2102
AdminDeeZee2 –
It should lay flat on the floor unless the truck has a plastic slide in liner. You can take some pictures and fill out Contact Us form and attach the pictures and someone in our customer service will be in touch.
AdminDeeZee2 –
We do not offer a direct fit for a 97 F-250 8′ bed. The only option is the universal DZ85005.
AdminDeeZee2 –
We do offer F150 8′ bed mats. Not sure what year the F150 is that you are trying to fit. Put in the year, make, and model and the applications will show up.
AdminDeeZee2 –
The 6′ foot part number we offer can be trimmed to fit the 5″.
AdminDeeZee2 –
The bed mat will fit but because of the way the plastic liners are the mat will curve up on the sides.
AdminDeeZee2 –
Dz86917 will be the part number for the 1500 classic.
AdminDeeZee2 –
The truck bed mat works with spray in liners fine.
AdminDeeZee2 –
Out mats are 3/8″ thick.
AdminDeeZee2 –
It can. Most of the drop in liners are curved at the sides and the mats will follow that.
AdminDeeZee2 –
DZ87018 is a direct fit for the 19 Ranger 6′ bed. You can find out shipping costs by adding the part number to your cart and it will show that before you complete the order.
AdminDeeZee2 –
The mat weighs 45 lbs.
AdminDeeZee2 –
DZ86916 will be the part number for 3500 RAM.
AdminDeeZee2 –
We do not have a direct fit mat for a flareside bed.
AdminDeeZee2 –
DZ86996 will fit a 09-18 5.5′ Dodge Ram bed. It will also work on the Classic.
AdminDeeZee2 –
We do not have a direct fit application for a 99 F150. Only option would be either of our universal numbers. DZ85005 or DZ85009.
AdminDeeZee2 –
DZ87019 is the application number for a 19 Chevy 5′ bed.
AdminDeeZee2 –
It will have to be trimmed to fit the 5′ bed.
AdminDeeZee2 –
For the Ram box bed the bed mat will have to be trimmed to fit.
AdminDeeZee2 –
You can contact us with a part number for availability.
AdminDeeZee2 –
DZ87017 is for the 5.5′ 19 Ranger. This is a custom fit application that will have the cut outs to go around the wheel well tubs.
AdminDeeZee2 –
Bed mats can be ordered from our website or any of our other online dealers.
AdminDeeZee2 –
It has been shipping. However at this time we are back ordered in our warehouse. I would check with some of our dealers, they may have ordered and received some.
AdminDeeZee2 –
We are still looking at all kinds of products for the Gladiator. Not sure if the bed mat will be one of those items or not.
AdminDeeZee2 –
We do not offer custom fit for a van. The shape and contour of the interior of a van is not the same as a truck. We would just have universal rectangle mats available for the van.
AdminDeeZee2 –
You can go to our outlet store or any of the other retailers in the area to buy our product. Other places that sell our product is Midwest Wheel or Total Truck. This is just a couple. Type your zip into our dealer locator for a complete list.
AdminDeeZee2 –
It will but if this is the plastic liner the bedmat will follow the curve at the side of the bed.
AdminDeeZee2 –
It depends on what the manufacturer calls out the length on the vehicle. The measurements do not match a 5.5′, 6′, or 8′ exact. The actual length will be longer but we follow the industry descriptions for how they call out the bed sizes.
AdminDeeZee2 –
We are located in Des Moines, IA and most items reach either coast in approximately 3 days with ground service.
AdminDeeZee2 –
The rubber is recycled but goes through a lot different processes to make sure there is not any foreign materials in the rubber.
AdminDeeZee2 –
We list it as a 5.5′ bed. This is how the manufacturers list them. The bed does measure longer than the 5.5′. The part number listed for the 5.5′ bed will be the proper fit.
AdminDeeZee2 –
All manufacturers term their bed lengths as 5.5′ when in reality they will measure longer. So DZ87019 for a 5.5′ bed would be the correct application.
AdminDeeZee2 –
Yes. There is no fitment issues for the trail boss model.
AdminDeeZee2 –
Yes. All our mats will fit over a liner. Depending on the type of liner will determine how well it fits. The plastic style will affect the fitment but spray in liners have no issues.
AdminDeeZee2 –
We have bedmats available for all three beds of the 19 Ford F150.
AdminDeeZee2 –
The inside layout is the same from dually to standard bed.
AdminDeeZee2 –
We have the bed mat available for all three bed length for the 19 Silverado.
AdminDeeZee2 –
Overall length and width of the mat.
AdminDeeZee2 –
There are specific part numbers for the new RAM truck. They are available.
AdminDeeZee2 –
It will work in the Denali model.
AdminDeeZee2 –
DZ87015 is a custom fit to the 5.5′ bed with not trimming needed.
AdminDeeZee2 –
We do offer bedmats to fit 8′ beds. Put in your year, make, and model to see if there is one for your vehicle.
AdminDeeZee2 –
We describe ours with the automakers use of length description. The “6.5′” bed will measure longer. It is about the same time frame to order from us or another dealer.
AdminDeeZee2 –
DZ87015 would be for the 5’7″ bed.
AdminDeeZee2 –
We have not had any information that tells us the Trail Boss Silverado bed is different from the standard Silverado. Part number DZ87020 would be for the 6.6′ bed.
AdminDeeZee2 –
It will fit just fine with a spray in liner.
AdminDeeZee2 –
That will fit the 5′ bed Colorado.
AdminDeeZee2 –
We are unaware of any bed differences of the Sierra models. DZ87020 should fit.
AdminDeeZee2 –
Year range for fitment on Silverado bed mats is 07-18.
AdminDeeZee2 –
The custom fit part number is DZ87010. No cutting necessary.
Joe H. –
Fits perfectly just rolled it out, that simple.
AdminDeeZee2 –
It will roll up on the sides a bit. Our rubber mats are designed to the factory bed with no changes. Such as plastic liners or spray in liners.
Rich –
Bought for 2019 Silverado 1500 LD with legacy body 6.5 foot bed, fit great.
AdminDeeZee2 –
We unfortunately we do not have one for the 5.6 bed.
AdminDeeZee2 –
The standard F150 bedmats will fit the Raptor. The bed size on the inside is the same on standard F150 and Raptor models.
AdminDeeZee2 –
It can still be installed. It may take a little longer for it to relax during the colder weather but the rubber is a soft enough compound that it will flatten out.
AdminDeeZee2 –
A good sharp utility knife blade will cut the rubber bed mats.
AdminDeeZee2 –
A good sharp utility knife blade will cut the rubber mat.
AdminDeeZee2 –
The bed mats do fit but will curve up the sides of the plastic liner because they are not square corners.
AdminDeeZee2 –
They are 3/8″ thick.
AdminDeeZee2 –
DZ87015 is the application part number. Most beds measure longer than but the manufacturers state them as 5.5′.
AdminDeeZee2 –
DZ87015 is the part number for 5’7″ bed.
AdminDeeZee2 –
The bed mats are 3/8″ thick.
AdminDeeZee2 –
The bedmats can be trimmed using a utility knife with a good and sharp blade.
AdminDeeZee2 –
You can look at DZ86917 for your application. Search that part number will get your information.
AdminDeeZee2 –
DZ87009 is the application number for the Colorado 2015+. It is a direct fit.
AdminDeeZee2 –
DZ87015 is the part number for 2019 RAM 1500 5.5′ bed.
AdminDeeZee2 –
DZ87007 is the correct number for your application.
AdminDeeZee2 –
DZ87009 is for the 5′ Colorado.
AdminDeeZee2 –
I am not sure which part number you are referencing. Please get in contact with customer service for further help. 800-779-2102
AdminDeeZee2 –
Yes. DZ87016 is the part number for the 2019 RAM 1500 6’4″ bed.
AdminDeeZee2 –
No. Ford has not changed the beds since the new model came out in 2015.
AdminDeeZee2 –
The 2019 RAM is a new bed. We have DZ86916 for 8′ and DZ86917 for 6.5′.
AdminDeeZee2 –
The part number listed for a 2019 Silverado is cut to the bed shape specific.
AdminDeeZee2 –
The industry standard description goes by 6.5. Most beds by all makers don’t measure 8, 6.5, or 5.5.
AdminDeeZee2 –
There should be no issues with installing either with a spray on bedliner.
AdminDeeZee2 –
Yes. We phrase it as a 5.5′ bed because that is what the industry has used for years. The mat measures at 65.75″ in length.
AdminDeeZee2 –
It will not fit a 2018. You can check with Koneta to see if they have one available for the 2018.
AdminDeeZee2 –
They are made out of both new and recycled rubber.
AdminDeeZee2 –
The only option we have is a universal part number which is DZ85005 (4′ x 8′) or DZ85009 (3.5′ x 6′).
AdminDeeZee2 –
We have not been contacted with regards to an issues for the bed mat on the 18 Super Crew.
AdminDeeZee2 –
Yes it will.
AdminDeeZee2 –
Do not have a direct fit for a step side bed.
Christian Puente –
Do you all have any for a 2006 silverado stepside ?
AdminDeeZee2 –
It is still a few months away.
AdminDeeZee2 –
We do not have a mat that would fit in that vehicle.
AdminDeeZee2 –
The mat will work fine with the spray in liner.
AdminDeeZee2 –
Yes. Our bed mats fit fine with any spray in liner.
Ronald clkark –
Ordered on a Friday. got it on a Monday. they thought I might have to trim it. Ha. Perfect fit. just rolled it out in the bed and was done
AdminDeeZee2 –
No. The bedmat part number changed in 2015. DZ87005 is the part number to fit a 15-18 F150 5.5′ bed.
AdminDeeZee2 –
DZ86996 can be trimmed to fit the ram boxes.
AdminDeeZee2 –
Width is the same at 62″. The lengths are different. DZ86972 is 69″ and DZ86973 is 78.5″.
AdminDeeZee2 –
We do not make custom bedmats.
AdminDeeZee2 –
Yes the mats are made in the USA.
AdminDeeZee2 –
Unfortunately we only have one that will fit up to a 2014.
AdminDeeZee2 –
No. They are heavy enough that it will not fly out. Depending on the length of the mat they range from 40 to 70 pounds.
AdminDeeZee2 –
All our bed mats are 3/8″ thick.
AdminDeeZee2 –
It will fit but may curve up on the sides as with the shape of the drop in liner. It is heavy enough it will not blow out.
AdminDeeZee2 –
Options are DZ85005 which is 4′ x 8′ or DZ85009 which is 3.5′ x 6′.
AdminDeeZee2 –
Currently we do not.
AdminDeeZee2 –
It will not fit exactly because that Raptor overall is a wider truck than the standard F150.
AdminDeeZee2 –
Do not have a direct fit part number. It would be a universal part number of DZ85005.
AdminDeeZee2 –
We do. It is DZ86996 and it has to be trimmed to fit the Ram box.
AdminDeeZee2 –
No. Do not recognize that number.
AdminDeeZee2 –
We don’t know what dealers have for inventory of our products. A lot of them will order from a distributor and have it the next day.
AdminDeeZee2 –
They do work with spray in liners.
AdminDeeZee2 –
The part number for the 6′ bed is DZ86917. With the factory installed liner the mat may not sit flat on the floor of the bed.
AdminDeeZee2 –
DZ86996 is for the 5.5′ bed. Most beds measure longer than the manufacture state bed length.
AdminDeeZee2 –
DZ86996 is the part number for the application. It will have to be trimmed to fit.
AdminDeeZee2 –
DZ86917 would be the part number.
AdminDeeZee2 –
We do not have a custom fit mat at this time for the Titan.
AdminDeeZee2 –
DZ87011 will be the correct number for the SuperDuty. The 6.5′ beds measure longer than 6.5′.
AdminDeeZee2 –
It depends on which bed length is on the truck. DZ86972 for 5.5′ and DZ86973 for 6.5′.
AdminDeeZee2 –
We do not have a custom fit mat. The option we have is a universal mat part number DZ85005.
AdminDeeZee2 –
DZ86928 is for a 5.5′ bed and DZ86929 is for 6.5′.
AdminDeeZee2 –
Only option would be a universal mat.
AdminDeeZee2 –
There would have to be a lot of trimming to fit in a step side. Best option would be a universal.
AdminDeeZee2 –
We do not have one for a flareside bed.
AdminDeeZee2 –
Take the mat out of the bag. Cut the shrink wrap and roll it out in the pickup bed.
AdminDeeZee2 –
Spray in bedliners it will lay flat. Plastic drop ins will affect how flat the mat lays and curl up at the sides.
AdminDeeZee2 –
Do not have a custom fit. We only have universal applications available. Largest size is 4′ x 8′.
AdminDeeZee2 –
We do not offer one for the 2002. First model year we have is for the 2004. Check Koneta rubber products they might have one.
AdminDeeZee2 –
It will but will not lay completely flat because of the sides of the plastic liner takes up the space where the rubber mat extends to.
AdminDeeZee2 –
We are looking into the this but this has not been confirmed of adding the part number.
AdminDeeZee2 –
DZ86965 has a cut line for the 5′ beds.
AdminDeeZee2 –
DZ87006 is for a 6.5′ F150 15-18.
AdminDeeZee2 –
At this time there is no information that we are going to have one for this vehicle. It may be something that may be available second quarter 2018 but nothing for sure.
AdminDeeZee2 –
86887 only fits up to 2006. Part number DZ86973 is for a 17-18.
AdminDeeZee2 –
The closet we have for an 04 5’8″ is DZ86887 which measures W 63.75″ x L 78.25″.
AdminDeeZee2 –
DZ86917 will be the correct application. the mat measures 63″ W x 75″ L.
AdminDeeZee2 –
That is a custom fit application. There would not be any trimming necessary.
AdminDeeZee2 –
The custom fit applications will not require any trimming. The universal part numbers may need some trimming.
AdminDeeZee2 –
At this time there has been no information on a bed mat for the 18 Ridgeline.
AdminDeeZee2 –
Yes. Just print off the rebate form and follow the instructions for submittance.
AdminDeeZee2 –
The utility mat would lay on top of the liner but may curve up on the sides. The mats can be trimmed.
AdminDeeZee2 –
DZ86965 will be the part number to fit. It is for the 6′ bed and there is a cut line on the mat for fitment in the 5′.
AdminDeeZee2 –
I do not know that answer since our current part number only fits to 2013.
AdminDeeZee2 –
All custom fit applications goes by year, make, model, and bed size. Or there is the universal option which is a trim to fit.
AdminDeeZee2 –
They do still have Nycord in the mats. Thank you for bringing this to our attention so we can update our information.
AdminDeeZee2 –
It would be DZ86964. If the bed is a 5′ bed it will have a cut line to trim it to fit this bed length.
AdminDeeZee2 –
We have a universal rubber tailgate protector. DZ86700. Depending on application there may be trimming need for fitment.
AdminDeeZee2 –
No. The shape of the floor is different. DZ87006 would be for a 15+ F150 6.5′ bed.
AdminDeeZee2 –
Some will use a utility knife, industrial scissors, or a fine tooth circular saw blade.
AdminDeeZee2 –
Our bed mats are 3/8″ thick.
AdminDeeZee2 –
To fit in the Ram with the ram box it will have to be trimmed.
AdminDeeZee2 –
No. The shape is not the same. The cutouts will not line up.
AdminDeeZee2 –
We do not have an application for that truck. We were unable to get a nice and clean look for that new style tailgate.
AdminDeeZee2 –
The option we would have for an 87 is the universal 4′ x 8′ that can be trimmed.
AdminDeeZee2 –
Someone from our customer relations team will be in touch with you.
AdminDeeZee2 –
You would have to order the full size and trim it to fit.
AdminDeeZee2 –
The length is different. One is for an 8′ and one is 6′. Difference is 9.5″.
AdminDeeZee2 –
For a 98 Tacoma part is DZ86501. This is for a 6′ bed. If you have a the 5′ bed there is a cut line on the mat for that length bed.
AdminDeeZee2 –
There is a chance that if not careful the mat could get cut with the edge of a shovel. If done right they can withstand the shoveling.
AdminDeeZee2 –
Part number DZ86973 would be the custom fit mat for 17 Silverado 2500 HD.
AdminDeeZee2 –
The shape will not match up to your vehicle. The best option we have is a universal DZ85009.
AdminDeeZee2 –
As you put your vehicle in the drop down windows the length choices will following Silverado 1500 window. There will then be options. 5.5′, 6.5′, and 8′.
AdminDeeZee2 –
You can trim the 8ft part number and it will fit. It will follow the contour of the bed. We don’t have tonneau covers. At one time we have some that worked with our Invis-A-Rack.
AdminDeeZee2 –
Unfortunately we are unable to search orders in our system by a name. Please get in contact with Cabelas customer service. They can call us with the PO that was sent to us for your order. We will then be able to look into your order.
AdminDeeZee2 –
Spray in liners do not affect the fitment. The plastic ones are the type that affect fitment the most.
AdminDeeZee2 –
Not sure which mat you are referring to. Do you have a part number you were looking at?
AdminDeeZee2 –
Depends on which bed length is on the truck. DZ87005 is for the 5.5′ and DZ87006 is for the 6.5′ bed.
AdminDeeZee2 –
The difference is that the DZ86882 is for the Super Duty and DZ 86928 is for is for the F150. They will have a different shape cut. The shape of the inside bed is different between the trucks.
AdminDeeZee2 –
The universal mat will work with some trimming.
AdminDeeZee2 –
Model number DZ86929 will fit a 09 F150.
AdminDeeZee2 –
DZ86996 will fit the Rambox with some trimming. The mat weighs 37 lbs.
AdminDeeZee2 –
Yes there is a difference. Fleet side is a standard or traditional bed. The step side is of course narrower than the fleet side because the wheel well tubs are on the out side of the bed. You would have to go with a universal size mat.
AdminDeeZee2 –
DZ87006.
AdminDeeZee2 –
The only one we have available is for the Tacoma. 89-04 is a DZ86501.
AdminDeeZee2 –
You will be able to get a part number by putting your vehicle in.
AdminDeeZee2 –
The automakers actually make the truck beds a little longer than what they call it. The bed mat is 69″ long to cover the length of the bed.
AdminDeeZee2 –
DZ86972.
AdminDeeZee2 –
If it is a custom fit mat, it would fit the year range of the truck the mat was in.
AdminDeeZee2 –
We don’t have a custom fit mat. We do have universal option of a 4′ x 8′ available. DZ85005.
AdminDeeZee2 –
Not sure on fitment. Our supplier does not show any information for the Lincoln. It may work but I don’t have the information to say yes.
AdminDeeZee2 –
The bedmat is DZ86917 and tailgate mat is DZ86700
AdminDeeZee2 –
It may not fit properly because of bed shape will be different.
AdminDeeZee2 –
We do have bed mats for the 17 1500 Dodge. 5′-DZ86996, 6′-Dz86917, and 8′-DZ86916.
AdminDeeZee2 –
We have just a universal tailgate mat available. Some trimming will be necessary on some applications. Part number is DZ86700.
AdminDeeZee2 –
The bedmats are 3/8″ thick and don’t move around. The tailgate mats are screwed down.
AdminDeeZee2 –
We only have the universal available for a 2001 Dodge. DZ85005 is 4′ x 8′ or DZ85009 3.5′ x 6″.
AdminDeeZee2 –
Our bedmats will lay over the top of the liner just fine.
AdminDeeZee2 –
DZ86972 is the part number for a 11 GM truck.
AdminDeeZee2 –
DZ86996 for the bedmat and DZ86700 is the tailgate mat. The tailgate mat is universal.
AdminDeeZee2 –
Here is what we state on our website “Resists Common Fuel & Oil Spills”.
AdminDeeZee2 –
Our mats are not predrilled for gooseneck hitches.
AdminDeeZee2 –
It will fit the 6.5′ bed.
AdminDeeZee2 –
Contact customer service with a part number. 800-779-2102.
AdminDeeZee2 –
The bedmats are custom fit to the bed. However if there is a liner in the bed, this can affect fitment.
AdminDeeZee2 –
The bed mats are solid rubber and can be trimmed if needed.
AdminDeeZee2 –
It will fit. But it will not lay flat. The mats are designed to fit the shape of the bed without any other liners
AdminDeeZee2 –
The mat will not sit on the floor of the bed very well. It is designed to fit with out the liner. It can be trimmed. Any modification to products voids warranty.
AdminDeeZee2 –
The bed mats are heavy enough that they will not blow out of the back of a truck bed.
AdminDeeZee2 –
Dee Zee does not have an application for the 68″ 2004 Silverado.
AdminDeeZee2 –
Yes it will fit.
AdminDeeZee2 –
Do not have a custom fit for a flareside Ranger.
AdminDeeZee2 –
Part number is DZ87006.
AdminDeeZee2 –
Approximately 45 lbs.
AdminDeeZee2 –
Part number is DZ87005. This fits 5.5′ bed.
AdminJeff De Vries –
DZ 86917 would be the bedmat for a 2002 1500 Dodge short bed.
AdminJeff De Vries –
We do not have a custom fit application for a 1987 Chevy. Best option would be our 4′ x 8′ universal mat DZ 85005.
AdminJeff De Vries –
The mats are slip resistant made from recycled tires. We suggest that caution is used when loading anything on a surface that is wet.
AdminDeeZee –
A Chevy Silverado 8′ bed would use DZ86886 and it would populate using the drop down fields.
AdminDeeZee –
We do not offer delivery to Canada through our website. Please use our dealers link to find a local dealer or an online dealer that can accommodate shipments to Canada.
AdminDeeZee –
At this time we are not planning on custom fit bed mat for the 2017 Honda Ridgeline. Please review our universal options.